FormerlyStock

Honda Civic FK

FK (10th gen) · 2017–2021

Engine
K20C1
Power
316 hp
Curb weight
1,390 kg
Bolt pattern (PCD)
5x120
Honda Civic FK

Photo: Ethan Llamas · CC BY-SA 4.0 · Wikimedia Commons

Key facts

The Honda Civic FK was built from 2017–2021. Engines: K20C1. Factory output is 316 hp (Japanese-market figures). Wheels bolt on with a 5x120 pattern, 64.1 mm hub bore and M14x1.5 lug thread.

Build guide

Honda Civic Type R (FK8)

K20C1 turbo

The first Type R sold in North America in years. The K20C1 makes 350+ hp with a tune on the stock turbo. Intercooler, downpipe and fuel are the next steps, then a turbo upgrade.

  1. Stage 0 · BaselineStock (~306–320 hp)Fluids, catch can.~$500–1,500 CAD
  2. Stage 1 · Street~360 hpTune.~$1,500–3,000 CAD
  3. Stage 2 · Spirited / Track~375–400 hpIntercooler, downpipe, fuel.~$4,000–8,000 CAD
  4. Stage 3 · Full build450–500 hpTurbo upgrade.~$10,000–20,000 CAD
Check before modifying (5)
  • Heat soak on track; intercooler upgrade helps.
  • Factory fuel system limits power.
  • A/C compressor clutch failures.
  • Rev-hang and heat soak on stock intercooler.
  • Clutch wear on hard-launched cars.
Read the full Honda Civic Type R (FK8) build guide →

Wheel fitment guide

Wheel and tire sizes that fit the Honda Civic FK, from the largest setup that needs no fender work to an aggressive stance.

Wheel fitment guide
SetupFrontRearWhat it takes
SafeMax fitment, no fender work18×8.5 +45245/40R1818×8.5 +45245/40R18Bolts on (lowered on good springs or coilovers)
FlushSits at the fender18×9.5 +45265/35R1818×9.5 +45265/35R18Fender roll
AggressivePoke and stance18×10 +40275/35R1818×10 +40275/35R18Fender roll, Negative camber, Coilovers

Down-sizing from the stock 20s to 18s is the popular track setup. Community-consensus starting points. Ride height, camber, tire brand and fender condition all change what fits: test-fit before you buy.

Performance upgrades

The usual path for this car’s engines, from bolt-ons to big power, and what tends to break first.

Honda K20C1

Turbo

Tune, intercooler and E85 for big gains on the stock turbo.

  1. Stage 1 · Bolt-ons+30–50 hp
    • ECU tune
    • Intake
    • Downpipe
  2. Stage 2 · Supporting mods+60–90 hp
    • Intercooler upgrade
    • E85 / flex fuel
    • Exhaust
    • Clutch
  3. Stage 3 · Big power+120–200 hp
    • Upgraded turbo
    • Fuel system
    • High-pressure fuel pump

Known weak points

  • The stock intercooler heat-soaks on track.
  • The factory clutch is the first driveline limit.
More about the Honda K20C1 →

Trims

TrimChassis codeEngineDrivetrainPowerBolt pattern (PCD)Years
Type RFK8K20C1FF316 hp5x1202017–2021

Stock spec sheet

FK Type RFK8

Japan (JDM)2017–2021

Engine & drivetrain

Engine
K20C1
Displacement
1,996 cc (2 L)
Aspiration
Turbo
Bore × stroke
86 × 85.9 mm
Compression
9.8:1
Transmission
6MT
Drivetrain
Front-engine, FWD (FF)
Differential
Helical front

Stock performance

Power
316 hp (235 kW) @ 6,500 rpm
Torque
400 N·m (295 lb-ft) @ 2,500 rpm
Curb weight
1,390 kg (3,064 lb)
Weight per hp
4.4 kg/hp (9.7 lb/hp)
Fuel tank
46 L (12.2 US gal)

Factory wheels & tires

Wheels
20x8.5
Tires
245/30ZR20
Tire diameter
655 mm (25.8 in)
Bolt pattern (PCD)
5x120
Center bore
64.1 mm
Lug thread
M14x1.5

Dimensions

Length
4,560 mm (179.5 in)
Width
1,875 mm (73.8 in)
Height
1,435 mm (56.5 in)
Wheelbase
2,700 mm (106.3 in)

Source: Formerly Stock compiled from Japanese-market manufacturer data

Frequently asked questions

What engine does the Honda Civic FK have?

The Honda Civic FK came with the K20C1.

How much horsepower does the Honda Civic FK have?

The Honda Civic FK makes 316 hp from the factory (Japanese-market figures).

What is the bolt pattern of the Honda Civic FK?

The Honda Civic FK uses a 5x120 bolt pattern with a 64.1 mm hub bore and M14x1.5 lug thread.

What size wheels fit the Honda Civic FK without rolling the fenders?

About 18x8.5 +45 (245/40R18) on all four corners fits without fender work on a typically lowered car. Bigger setups need a fender roll or more.

What are the common problems with the Honda K20C1?

The stock intercooler heat-soaks on track. The factory clutch is the first driveline limit.

Where should I start building a Honda Civic FK?

Fluids, catch can. Fluids, catch can, baseline logs.

How much power can a Honda Civic FK make, and what does it cost?

A full build (Turbo upgrade) typically makes 450–500 hp, for roughly 10,000–20,000 CAD in parts. These are estimates; fuel, tune and parts choices change the result.

Shops for the Honda Civic FK

Specialists who build their business around this car: deep catalogs, and people who know its quirks.

Prices, stock and shipping are on each store's site. Formerly Stock doesn't get paid for these links.