FormerlyStock

Mazda RX-7 FC

FC (2nd gen) · 1985–1992

Engine
13B-T
Power
183–202 hp
Bolt pattern (PCD)
4x114.3 / 5x114.3
Mazda RX-7 FC

Photo: Elise240SX · CC BY-SA 4.0 · Wikimedia Commons

Key facts

The Mazda RX-7 FC was built from 1985–1992. Engines: 13B-T. Factory output ranges from 183 to 202 hp (Japanese-market figures). Wheels bolt on with a 4x114.3 / 5x114.3 pattern, — mm hub bore and M12x1.5 lug thread.

Build guide

Mazda RX-7 Turbo (FC3S)

13B-T

A turbo rotary coupe with a strong following. Seal health and cooling come first; then intercooler, ECU and turbo.

  1. Stage 0 · BaselineStock (~185–205 PS)Compression test, cooling, oil metering.~$2,000–5,000 CAD
  2. Stage 1 · Street~200–240 whpExhaust, intake, boost.~$2,500–5,000 CAD
  3. Stage 2 · Spirited / Track~260–320 whpFMIC, ECU, fuel.~$6,000–12,000 CAD
  4. Stage 3 · Full build350+ whpSingle turbo, rebuilt engine.~$15,000–30,000 CAD
Check before modifying (3)
  • Apex and coolant seal wear.
  • Oil metering pump and lines.
  • Overheating.
Read the full Mazda RX-7 Turbo (FC3S) build guide →

Wheel fitment guide

Wheel and tire sizes that fit the Mazda RX-7 FC, from the largest setup that needs no fender work to an aggressive stance.

Wheel fitment guide
SetupFrontRearWhat it takes
SafeMax fitment, no fender work16×8 +30225/50R1616×8 +30225/50R16Bolts on (lowered on good springs or coilovers)
FlushSits at the fender17×8 +30225/45R1717×8 +30225/45R17Fender roll
AggressivePoke and stance17×9 +20245/40R1717×9 +20245/40R17Fender roll, Fender pull, Negative camber, Coilovers

4x114.3 until 1988, 5x114.3 from 1989. Community-consensus starting points. Ride height, camber, tire brand and fender condition all change what fits: test-fit before you buy.

Performance upgrades

The usual path for this car’s engines, from bolt-ons to big power, and what tends to break first.

Mazda 13B-T rotary

Turbo

A bigger turbo, injectors and a standalone ECU for 300+ hp.

  1. Stage 1 · Bolt-ons200–230 hp
    • Boost controller
    • Intake
    • Exhaust
    • Cooling upgrade
  2. Stage 2 · Supporting mods250–300 hp
    • Upgraded turbo
    • Injectors
    • Standalone ECU
  3. Stage 3 · Big power350+ hp
    • Porting
    • Apex seals
    • Front-mount intercooler

Known weak points

  • Apex seals and rotor housings; a compression test is a must.
  • Cooling and oil cooler need to be in top shape.
More about the Mazda 13B-T rotary →

Popular engine swaps

Trims

TrimChassis codeEngineDrivetrainPowerBolt pattern (PCD)Years
TurboFC3S13B-TFR202 hp4x114.3 / 5x114.31985–1992

Stock spec sheet

FC TurboFC3S

Japan (JDM)1985–1988

Engine & drivetrain

Engine
13B-T
Displacement
1,308 cc (1.3 L)
Aspiration
Turbo
Compression
8.5:1
Transmission
5MT
Drivetrain
Front-engine, RWD (FR)

Stock performance

Power
183 hp (136 kW) @ 6,500 rpm
Torque
245 N·m (181 lb-ft) @ 3,500 rpm

Factory wheels & tires

Wheels
15"
Tires
205/60R15
Tire diameter
627 mm (24.7 in)
Bolt pattern (PCD)
4x114.3
Lug thread
M12x1.5

Dimensions

Length
4,310 mm (169.7 in)
Width
1,690 mm (66.5 in)
Height
1,270 mm (50 in)
Wheelbase
2,430 mm (95.7 in)

Source: Formerly Stock compiled from Japanese-market manufacturer data

Frequently asked questions

What engine does the Mazda RX-7 FC have?

The Mazda RX-7 FC came with the 13B-T.

How much horsepower does the Mazda RX-7 FC have?

The Mazda RX-7 FC makes between 183 and 202 hp from the factory, depending on trim and year (Japanese-market figures).

What is the bolt pattern of the Mazda RX-7 FC?

The Mazda RX-7 FC uses a 4x114.3 / 5x114.3 bolt pattern with a — mm hub bore and M12x1.5 lug thread.

What size wheels fit the Mazda RX-7 FC without rolling the fenders?

About 16x8 +30 (225/50R16) on all four corners fits without fender work on a typically lowered car. Bigger setups need a fender roll or more.

What are popular engine swaps for the Mazda RX-7 FC?

Popular swaps include 13B-REW (FD), 20B (three-rotor), GM LS (V8), 2JZ-GTE.

What are the common problems with the Mazda 13B-T rotary?

Apex seals and rotor housings; a compression test is a must. Cooling and oil cooler need to be in top shape.

Where should I start building a Mazda RX-7 FC?

Compression test, cooling, oil metering. Compression test, then cooling.

How much power can a Mazda RX-7 FC make, and what does it cost?

A full build (Single turbo, rebuilt engine) typically makes 350+ whp, for roughly 15,000–30,000 CAD in parts. These are estimates; fuel, tune and parts choices change the result.

Shops for the Mazda RX-7 FC

Specialists who build their business around this car: deep catalogs, and people who know its quirks.

Prices, stock and shipping are on each store's site. Formerly Stock doesn't get paid for these links.