FormerlyStock

Nissan 180SX S13

S13 (240SX hatchback) · 1989–1998

Engine
CA18DET / SR20DET
Power
173–202 hp
Bolt pattern (PCD)
4x114.3
Nissan 180SX S13

Photo: Tokumeigakarinoaoshima · CC BY-SA 4.0 · Wikimedia Commons

Key facts

The Nissan 180SX S13 was built from 1989–1998. Engines: CA18DET, SR20DET. Factory output ranges from 173 to 202 hp (Japanese-market figures). Wheels bolt on with a 4x114.3 pattern, 66.1 mm hub bore and M12x1.25 lug thread.

Build guide

Nissan Silvia / 180SX (S13)

CA18DET (early) / SR20DET (from 1991)

The definitive cheap FR drift and street platform. Coupe (Silvia) and hatch (180SX) share mechanicals. Both CA18DET and SR20DET respond well to boost, and parts support is huge. Many shells have been crashed, rusted or badly modified, so the chassis matters most.

  1. Stage 0 · BaselineStock (175–205 PS)Fix rust, wiring and cooling before any power.~$1,500–5,000 CAD
  2. Stage 1 · Street~200–240 whp (SR20) / ~180–220 whp (CA18)Coilovers, LSD, exhaust and modest boost.~$3,000–6,000 CAD
  3. Stage 2 · Spirited / Track~280–350 whpTurbo upgrade, fuel, ECU; drift-ready chassis.~$6,000–12,000 CAD
  4. Stage 3 · Full build400–550 whpBuilt SR or JZ/RB swap; competition drivetrain.~$15,000–35,000 CAD
Check before modifying (5)
  • Rust (strut towers, rear arches, floors) and accident damage.
  • SR20DET rocker arms can pop at high rpm; rocker stoppers are cheap insurance.
  • SR20DET oil-pump drive collar wear at high rpm; upgraded collar or pump fixes it.
  • Factory viscous LSD (where fitted) is usually worn.
  • Original wiring and engine-swap quality varies; inspect every harness.
Read the full Nissan Silvia / 180SX (S13) build guide →

Wheel fitment guide

Wheel and tire sizes that fit the Nissan 180SX S13, from the largest setup that needs no fender work to an aggressive stance.

Wheel fitment guide
SetupFrontRearWhat it takes
SafeMax fitment, no fender work17×8 +35215/45R1717×8 +35215/45R17Bolts on (lowered on good springs or coilovers)
FlushSits at the fender17×9 +25235/40R1717×9 +25235/40R17Fender roll, Negative camber
AggressivePoke and stance18×9.5 +15245/40R1818×10.5 +12265/35R18Fender roll, Fender pull, Negative camber, Coilovers

Factory 4x114.3; many convert to 5x114.3 with S14/Z32 hubs. Community-consensus starting points. Ride height, camber, tire brand and fender condition all change what fits: test-fit before you buy.

Performance upgrades

The usual path for this car’s engines, from bolt-ons to big power, and what tends to break first.

Nissan CA18DET

Turbo

Many keep it over an SR20 swap: it likes boost and revs.

  1. Stage 1 · Bolt-ons190–210 hp
    • Boost controller
    • Intake
    • Exhaust
    • Front-mount intercooler
  2. Stage 2 · Supporting mods230–260 hp
    • Upgraded turbo
    • Fuel pump
    • Injectors
    • ECU tune
  3. Stage 3 · Big power300+ hp
    • Standalone ECU
    • Head work
    • Built bottom end

Known weak points

  • Timing belt (not chain) and oil leaks at this age.
  • The factory ECU and airflow meter must go for bigger turbos.
More about the Nissan CA18DET →

Nissan SR20DET

Turbo

A bolt-on ball-bearing turbo upgrade makes 300+ hp on stock internals.

  1. Stage 1 · Bolt-ons230–270 hp
    • Boost controller
    • Intake
    • Exhaust
    • Front-mount intercooler
    • ECU tune
  2. Stage 2 · Supporting mods300–350 hp
    • Upgraded turbo
    • Fuel pump
    • Injectors
    • Clutch
  3. Stage 3 · Big power400–500 hp
    • Built bottom end
    • Head work
    • Oil pump
    • Standalone ECU

Known weak points

  • Rocker arms can be thrown when over-revved; fit rocker stoppers.
  • The oil pump drive collar fails; upgrade to an aftermarket pump.
  • Timing chain guides and VTC gears rattle with age.
More about the Nissan SR20DET →

Popular engine swaps

Trims

TrimChassis codeEngineDrivetrainPowerBolt pattern (PCD)Years
Turbo (CA18DET)RS13CA18DETFR173 hp4x114.31989–1991
Turbo (SR20DET)RPS13SR20DETFR202 hp4x114.31991–1998

Stock spec sheet

S13 Turbo (CA18DET)RS13

Japan (JDM)1989–1991

Engine & drivetrain

Engine
CA18DET
Displacement
1,809 cc (1.8 L)
Aspiration
Turbo
Bore × stroke
83 × 83.6 mm
Compression
8.5:1
Transmission
5MT / 4AT
Drivetrain
Front-engine, RWD (FR)

Stock performance

Power
173 hp (129 kW) @ 6,400 rpm
Torque
226 N·m (167 lb-ft) @ 4,000 rpm

Factory wheels & tires

Wheels
15x6
Tires
195/60R15
Tire diameter
615 mm (24.2 in)
Bolt pattern (PCD)
4x114.3
Center bore
66.1 mm
Lug thread
M12x1.25

Dimensions

Length
4,540 mm (178.7 in)
Width
1,690 mm (66.5 in)
Height
1,290 mm (50.8 in)
Wheelbase
2,475 mm (97.4 in)

Source: Formerly Stock compiled from Japanese-market manufacturer data

S13 Turbo (SR20DET)RPS13

Japan (JDM)1991–1998

Engine & drivetrain

Engine
SR20DET
Displacement
1,998 cc (2 L)
Aspiration
Turbo
Bore × stroke
86 × 86 mm
Compression
8.5:1
Transmission
5MT / 4AT
Drivetrain
Front-engine, RWD (FR)

Stock performance

Power
202 hp (151 kW) @ 6,000 rpm
Torque
275 N·m (203 lb-ft) @ 4,000 rpm

Factory wheels & tires

Wheels
15x6
Tires
195/60R15
Tire diameter
615 mm (24.2 in)
Bolt pattern (PCD)
4x114.3
Center bore
66.1 mm
Lug thread
M12x1.25

Dimensions

Length
4,540 mm (178.7 in)
Width
1,690 mm (66.5 in)
Height
1,290 mm (50.8 in)
Wheelbase
2,475 mm (97.4 in)

Source: Formerly Stock compiled from Japanese-market manufacturer data

Frequently asked questions

What engine does the Nissan 180SX S13 have?

The Nissan 180SX S13 came with the CA18DET, SR20DET.

How much horsepower does the Nissan 180SX S13 have?

The Nissan 180SX S13 makes between 173 and 202 hp from the factory, depending on trim and year (Japanese-market figures).

What is the bolt pattern of the Nissan 180SX S13?

The Nissan 180SX S13 uses a 4x114.3 bolt pattern with a 66.1 mm hub bore and M12x1.25 lug thread.

What size wheels fit the Nissan 180SX S13 without rolling the fenders?

About 17x8 +35 (215/45R17) on all four corners fits without fender work on a typically lowered car. Bigger setups need a fender roll or more.

What are popular engine swaps for the Nissan 180SX S13?

Popular swaps include SR20DET, RB25DET, 2JZ-GTE, GM LS (V8).

What are the common problems with the Nissan CA18DET?

Timing belt (not chain) and oil leaks at this age. The factory ECU and airflow meter must go for bigger turbos.

What are the common problems with the Nissan SR20DET?

Rocker arms can be thrown when over-revved; fit rocker stoppers. The oil pump drive collar fails; upgrade to an aftermarket pump. Timing chain guides and VTC gears rattle with age.

Where should I start building a Nissan 180SX S13?

Fix rust, wiring and cooling before any power. Rust and chassis inspection, then engine compression and leak-down. Cooling system, timing service, fluids; rocker stoppers on SR cars.

How much power can a Nissan 180SX S13 make, and what does it cost?

A full build (Built SR or JZ/RB swap; competition drivetrain) typically makes 400–550 whp, for roughly 15,000–35,000 CAD in parts. These are estimates; fuel, tune and parts choices change the result.

Shops for the Nissan 180SX S13

No specialist shop for the Nissan 180SX S13 in our list yet. The Japanese-car shops in the store directory carry parts for it.

Prices, stock and shipping are on each store's site. Formerly Stock doesn't get paid for these links.