FormerlyStock

Toyota MR2 ZZW30

ZZW30 (MR-S / MR2 Spyder) · 1999–2007

Engine
1ZZ-FE
Power
138 hp
Curb weight
970 kg
Bolt pattern (PCD)
4x100
Toyota MR2 ZZW30

Photo: MercurySable99 · CC BY-SA 4.0 · Wikimedia Commons

Key facts

The Toyota MR2 ZZW30 was built from 1999–2007. Engines: 1ZZ-FE. Factory output is 138 hp (Japanese-market figures). Wheels bolt on with a 4x100 pattern, 54.1 mm hub bore and M12x1.5 lug thread.

Build guide

Toyota MR-S / MR2 Spyder (ZZW30)

1ZZ-FE

A light, cheap mid-engine roadster that's mostly about handling. The pre-cat failure on early cars must be dealt with first. Power builds either turbocharge the 1ZZ at low boost or swap in a 2ZZ-GE.

  1. Stage 0 · BaselineStock (~140 PS)Pre-cat check or replacement, oil consumption, mounts.~$1,000–3,000 CAD
  2. Stage 1 · Street~+5 hpChassis and brakes.~$1,500–3,500 CAD
  3. Stage 2 · Spirited / Track~170–200 whpLow-boost turbo on the 1ZZ, or a 2ZZ-GE swap.~$5,000–10,000 CAD
  4. Stage 3 · Full build250+ whpBuilt engine (2ZZ or 1ZZ) with turbo for 250+ whp.~$12,000–25,000 CAD
Check before modifying (4)
  • Early (2000–2002) cars suffer pre-cat breakdown; debris can be pulled into the engine. Worn rings and oil burning are the root cause.
  • Oil consumption on 1ZZ-FE; check level often.
  • SMT (sequential manual) actuator problems; manual cars are simpler.
  • Shallow oil pan and mid-engine layout can starve oil in long corners.
Read the full Toyota MR-S / MR2 Spyder (ZZW30) build guide →

Performance upgrades

The usual path for this car’s engines, from bolt-ons to big power, and what tends to break first.

Toyota 1ZZ-FE / 2ZZ-GE

Naturally aspirated

2ZZ cars respond to a lower lift-engagement point and a header; 1ZZ cars to forced induction or a 2ZZ swap.

  1. Stage 1 · Bolt-ons+10–20 hp
    • Intake
    • Header
    • Exhaust
    • ECU tune
  2. Stage 2 · Supporting mods+50–70 hp
    • Supercharger kit
    • Fuel system
  3. Stage 3 · Big power+100–150 hp
    • Turbo kit
    • Built bottom end
    • Standalone ECU

Known weak points

  • Pre-2005 1ZZ piston rings can burn oil.
  • 2ZZ lift bolt and oil starvation on hard track use.
More about the Toyota 1ZZ-FE / 2ZZ-GE →

Popular engine swaps

Trims

TrimChassis codeEngineDrivetrainPowerBolt pattern (PCD)Years
MR-SZZW301ZZ-FEMR138 hp4x1001999–2007

Stock spec sheet

ZZW30 MR-SZZW30

Japan (JDM)1999–2007

Engine & drivetrain

Engine
1ZZ-FE
Displacement
1,794 cc (1.8 L)
Aspiration
Naturally aspirated
Bore × stroke
79 × 91.5 mm
Compression
10:1
Transmission
5MT
Drivetrain
Mid-engine, RWD (MR)

Stock performance

Power
138 hp (103 kW) @ 6,400 rpm
Torque
171 N·m (126 lb-ft) @ 4,400 rpm
Curb weight
970 kg (2,138 lb)
Weight per hp
7 kg/hp (15.5 lb/hp)
Fuel tank
48 L (12.7 US gal)

Factory wheels & tires

Wheels (front)
15x6
Wheels (rear)
15x6.5
Tires (front)
185/55R15
Tires (rear)
205/50R15
Bolt pattern (PCD)
4x100
Center bore
54.1 mm
Lug thread
M12x1.5

Dimensions

Length
3,885 mm (153 in)
Width
1,695 mm (66.7 in)
Height
1,235 mm (48.6 in)
Wheelbase
2,450 mm (96.5 in)

Early cars; 16-inch rears from the 2002 update.

Source: Formerly Stock compiled from Japanese-market manufacturer data

Frequently asked questions

What engine does the Toyota MR2 ZZW30 have?

The Toyota MR2 ZZW30 came with the 1ZZ-FE.

How much horsepower does the Toyota MR2 ZZW30 have?

The Toyota MR2 ZZW30 makes 138 hp from the factory (Japanese-market figures).

What is the bolt pattern of the Toyota MR2 ZZW30?

The Toyota MR2 ZZW30 uses a 4x100 bolt pattern with a 54.1 mm hub bore and M12x1.5 lug thread.

What are popular engine swaps for the Toyota MR2 ZZW30?

Popular swaps include 2ZZ-GE, Toyota 2GR-FE V6.

What are the common problems with the Toyota 1ZZ-FE / 2ZZ-GE?

Pre-2005 1ZZ piston rings can burn oil. 2ZZ lift bolt and oil starvation on hard track use.

Where should I start building a Toyota MR2 ZZW30?

Pre-cat check or replacement, oil consumption, mounts. Compression test and pre-cat inspection, then header and oil baffle.

How much power can a Toyota MR2 ZZW30 make, and what does it cost?

A full build (Built engine (2ZZ or 1ZZ) with turbo for 250+ whp) typically makes 250+ whp, for roughly 12,000–25,000 CAD in parts. These are estimates; fuel, tune and parts choices change the result.

Shops for the Toyota MR2 ZZW30

No specialist shop for the Toyota MR2 ZZW30 in our list yet. The Japanese-car shops in the store directory carry parts for it.

Prices, stock and shipping are on each store's site. Formerly Stock doesn't get paid for these links.