FormerlyStock

Build guide

Toyota Chaser / Mark II Tourer V (JZX100)

Engine: 1JZ-GTE VVT-i (single CT15B)

The JZX100 Tourer V is one of the defining drift and street sedans. The VVT-i 1JZ swapped the twins for a single CT15B, and it spools well at 1 bar. Bolt-on CT15B upgrades and simple single-turbo kits make 400+ whp easy.

Toyota Chaser / Mark II Tourer V (JZX100)

Photo: ChengH · CC BY-SA 4.0 · Wikimedia Commons

  1. Stage 0 · BaselineStock (~280 PS)Timing service, coils and cooling.~$1,500–3,500 CAD
  2. Stage 1 · Street~260–300 whpExhaust, intake and boost to ~1 bar.~$2,000–4,500 CAD
  3. Stage 2 · Spirited / Track~350–480 whpUpgraded CT15B or small single turbo, fuel and ECU.~$6,000–14,000 CAD
  4. Stage 3 · Full build500–700 whpBuilt 1JZ / 2JZ swap and a competition drivetrain.~$18,000–40,000 CAD

Check before modifying

  • CT15B uses a ceramic turbine; keep stock boost near 1 bar or replace.
  • Coil packs, VVT-i oil control valve, timing belt (interference).
  • Factory ECU boost cut; many cars already carry old piggyback hacks to undo.
0

Baseline

Timing service, coils and cooling.

Power (estimate)
Stock (~280 PS)
Parts budget
~$1,500–3,500 CAD

Engine

  • Timing belt kit, water pump, sealsAisinGatesToyota OEM

Electronics & tuning

  • Coil packs and plugsDensoNGK

Cooling

  • Radiator, hoses, thermostatKoyoMishimoto

Order of work

  1. Timing belt, then cooling, then a baseline dyno.
1

Street

Exhaust, intake and boost to ~1 bar.

Power (estimate)
~260–300 whp
Parts budget
~$2,000–4,500 CAD

Intake & exhaust

  • Front pipe and cat-backHKSBlitzTrust

Electronics & tuning

  • Boost controller + fuel cut defender or piggybackHKSBlitzApexi

Suspension

  • CoiloversTeinBC RacingCusco

Drivetrain

  • 2-way mechanical LSDCuscoOS GikenKaaz

Brakes

  • Performance pads and DOT 4 fluidHawkProject MuMotul

Wheels & tires

  • Quality 200TW performance tiresYokohamaBridgestoneFalken

Order of work

  1. Exhaust and boost control, then chassis.
2

Spirited / Track

Upgraded CT15B or small single turbo, fuel and ECU.

Power (estimate)
~350–480 whp
Parts budget
~$6,000–14,000 CAD

Forced induction

  • Billet CT15B upgrade or single turbo kitDriftmotionKinugawaGarrett G25-660Precision 5858

Cooling

  • FMICHKSGreddyTrust

Fuel

  • Injectors and pumpInjector DynamicsWalbroDeatschWerks

Electronics & tuning

  • Plug-in standalone ECULinkHaltech

Drivetrain

  • Uprated clutchOS GikenExedy

Suspension

  • Angle kit and adjustable rear armsWisefabDriftworksCusco

Order of work

  1. ECU and fuel, then turbo and intercooler.
  2. Tune on dyno; check the R154 synchros and clutch.
3

Full build

Built 1JZ / 2JZ swap and a competition drivetrain.

Power (estimate)
500–700 whp
Parts budget
~$18,000–40,000 CAD

Engine

  • Forged internals, ARP head studs, MLS gasketCPManleyARPCometic

Drivetrain

  • CD009/sequential gearboxDriftmotionSamsonasHolinger

Interior

  • Cage, seats, hydraulic handbrakeCuscoBrideDriftworks

Order of work

  1. Engine and gearbox as one project; then the cage and safety gear.

Power and budget figures are estimates (parts only, in CAD) for guidance, not guarantees: fuel, tune, climate and parts choices change everything. Brand names are examples, not endorsements or sponsorships. Removing or gutting catalytic converters, or disabling emissions systems, is illegal on road cars in Canada and the US; parts marked "off-road / track only" are for competition vehicles.

Sources