FormerlyStock

Build guide

Toyota MR2 G-Limited Supercharger (AW11)

Engine: 4A-GZE (supercharged)

A light mid-engine car with a supercharged 4A-GZE. The easiest gain is a smaller supercharger pulley, with fuel and timing to match. It's great for autocross; rust and old cooling lines are the enemy.

Toyota MR2 G-Limited Supercharger (AW11)

Photo: SealyPhoto · CC BY-SA 4.0 · Wikimedia Commons

  1. Stage 0 · BaselineStock (~145 PS)Rust, cooling system bleed, timing service.~$1,500–3,500 CAD
  2. Stage 1 · Street~+10 hpExhaust and chassis.~$1,500–3,000 CAD
  3. Stage 2 · Spirited / Track~150–180 whpPulley, fuel and ignition.~$2,500–5,000 CAD
  4. Stage 3 · Full build200+ whpBuilt 4A-GZE or swap (20V, 3S, 2ZZ).~$8,000–18,000 CAD

Check before modifying

  • Rust (rear, around the engine bay and floors).
  • Long coolant pipes running front to rear; air pockets and leaks.
  • Supercharger oil and clutch condition.
0

Baseline

Rust, cooling system bleed, timing service.

Power (estimate)
Stock (~145 PS)
Parts budget
~$1,500–3,500 CAD

Engine

  • Timing belt and water pumpAisinToyota OEM

Cooling

  • Coolant hoses and bleedToyota OEMMishimoto

Suspension

  • Bushings and dampersKYBSuperPro

Order of work

  1. Rust repair first, then cooling, then timing service.
1

Street

Exhaust and chassis.

Power (estimate)
~+10 hp
Parts budget
~$1,500–3,000 CAD

Intake & exhaust

  • ExhaustcustomTanabe

Suspension

  • Coilovers or springs/dampersTeinBC Racing

Brakes

  • Pads and fluidHawkMotul

Wheels & tires

  • Quality 200TW performance tiresYokohamaBridgestoneFalken

Order of work

  1. Chassis and tires; then exhaust.
2

Spirited / Track

Pulley, fuel and ignition.

Power (estimate)
~150–180 whp
Parts budget
~$2,500–5,000 CAD

Forced induction

  • Smaller supercharger pulleyvarious

Fuel

  • Injectors and pumpWalbroDeatschWerks

Electronics & tuning

  • Engine managementLinkHaltechSpeeduino

Cooling

  • Intercooler upgradecustom

Order of work

  1. Fuel and ECU first, then the pulley; check knock.
3

Full build

Built 4A-GZE or swap (20V, 3S, 2ZZ).

Power (estimate)
200+ whp
Parts budget
~$8,000–18,000 CAD

Engine

  • Forged internals or engine swapCPWiseco

Drivetrain

  • C-series gearbox with LSDOS GikenQuaife

Interior

  • Bucket seats, harnesses, roll bar or cageBrideSparcoCusco

Order of work

  1. Engine and gearbox together.

Power and budget figures are estimates (parts only, in CAD) for guidance, not guarantees: fuel, tune, climate and parts choices change everything. Brand names are examples, not endorsements or sponsorships. Removing or gutting catalytic converters, or disabling emissions systems, is illegal on road cars in Canada and the US; parts marked "off-road / track only" are for competition vehicles.

Sources