FormerlyStock

Build guide

Toyota Supra A70 (Mk3)

Engine: 7M-GTE (3.0GT Turbo) / 1JZ-GTE twin turbo (2.5GT Twin Turbo)

The 7M-GTE has a strong iron block but a well-known head-gasket weak point. Fixing that properly with studs and a quality gasket is the entry ticket to any power. The JDM 2.5GT Twin Turbo uses the 1JZ-GTE with ceramic CT12A twins. Both come with the strong R154 5MT in manual form.

Toyota Supra A70 (Mk3)

Photo: Rudolf Stricker · CC BY-SA 3.0 · Wikimedia Commons

  1. Stage 0 · BaselineStock (~230 hp 7M / ~280 PS 1JZ)Head gasket and studs done before any boost.~$2,500–5,000 CAD
  2. Stage 1 · Street~260–300 whp (7M) / ~260–300 whp (1JZ, near 1 bar)Exhaust, boost control and mild boost.~$2,000–4,500 CAD
  3. Stage 2 · Spirited / Track~350–450 whpStandalone ECU, fuel and a CT26 hybrid or small single.~$6,000–12,000 CAD
  4. Stage 3 · Full build500+ whpBuilt 7M or JZ swap (1JZ/2JZ) for 500+ whp.~$15,000–35,000 CAD

Check before modifying

  • 7M-GTE head gaskets fail, which is widely blamed on factory head-bolt torque. ARP studs are the standard fix.
  • 7M uses a Karman-vortex airflow meter that limits airflow and tuning; most builds convert to MAP or a standalone ECU.
  • Ceramic CT12A turbines on the 1JZ twin version can shed above about 1 bar.
  • Rust (rear arches, sunroof drains), tired TEMS dampers, cracked dashboards.

Trim differences

  • 7M cars use a CT26 single turbo; the 1JZ car uses twin CT12A.
0

Baseline

Head gasket and studs done before any boost.

Power (estimate)
Stock (~230 hp 7M / ~280 PS 1JZ)
Parts budget
~$2,500–5,000 CAD

Engine

  • ARP head studs + quality head gasket (7M)ARP 203-4202Toyota OEM updated gasketHKS/Cometic MLS
  • Timing belt, water pump and oil pump sealAisinGatesToyota OEM

Cooling

  • Radiator, hoses and fan clutchKoyoMishimoto

Suspension

  • Dampers (replacing TEMS) and bushingsKYBBilsteinTein

Order of work

  1. Compression test; if the gasket is original, plan the head job straight away.
  2. Machine the head flat and fit studs with a quality gasket.
  3. Timing belt and all fluids, then refresh the vacuum lines.
1

Street

Exhaust, boost control and mild boost.

Power (estimate)
~260–300 whp (7M) / ~260–300 whp (1JZ, near 1 bar)
Parts budget
~$2,000–4,500 CAD

Intake & exhaust

  • 3-inch downpipe and exhaustHKSDriftmotionSR Fab

Electronics & tuning

  • Boost controller + fuel cut defenderHKSBlitzGreddy

Cooling

  • Front-mount intercoolerGreddyMishimotoCXRacing

Brakes

  • Pads, lines and fluidHawkEBCMotul

Wheels & tires

  • Quality 200TW performance tiresYokohamaBridgestoneFalken

Order of work

  1. Exhaust and FMIC, then boost controller.
  2. Fit a wideband AFR gauge before raising boost.
2

Spirited / Track

Standalone ECU, fuel and a CT26 hybrid or small single.

Power (estimate)
~350–450 whp
Parts budget
~$6,000–12,000 CAD

Electronics & tuning

  • Standalone ECU + MAP conversionHaltechLinkAEMSpeeduino-based

Fuel

  • 550–850 cc injectors + 255–340 lph pumpInjector DynamicsDeatschWerksWalbro

Forced induction

  • CT26 hybrid or bolt-on singleDriftmotion CT26 57-trimGarrett GT3076R

Drivetrain

  • Uprated clutchExedyACTCompetition Clutch

Suspension

  • Coilovers and rear LSDTeinBC Racing; CuscoOS Giken

Order of work

  1. ECU and fuel first, then turbo.
  2. Dyno-tune; R154 is fine at this level.
3

Full build

Built 7M or JZ swap (1JZ/2JZ) for 500+ whp.

Power (estimate)
500+ whp
Parts budget
~$15,000–35,000 CAD

Engine

  • Forged pistons/rods or 2JZ-GTE swapCPManleyWiseco

Forced induction

  • Large single turbo kitPrecisionGarrettBorgWarner

Drivetrain

  • R154 rebuild or V160/CD009 swapDriftmotionCollins

Interior

  • Cage, seats, harnessesCuscoBrideSparco

Order of work

  1. Decide between a built 7M and a JZ swap; a swap is often cheaper per horsepower.
  2. Upgrade the axles, driveshaft and diff to match.

Power and budget figures are estimates (parts only, in CAD) for guidance, not guarantees: fuel, tune, climate and parts choices change everything. Brand names are examples, not endorsements or sponsorships. Removing or gutting catalytic converters, or disabling emissions systems, is illegal on road cars in Canada and the US; parts marked "off-road / track only" are for competition vehicles.

Sources