Toyota Supra A80 (Mk4)
2JZ-GTE (RZ, sequential twin turbo) / 2JZ-GE (SZ, NA)The 2JZ-GTE's iron block and forged crank take far more power than stock, so most builds go straight from bolt-ons to a big single turbo. The sequential twins are best kept for a tidy 350–400 whp street car. The SZ's 2JZ-GE is usually turbocharged (NA-T) or swapped for a GTE.
- Étape 0 · BaseStock (~276 hp crank RZ, ~220 hp SZ)Restore the car to a known healthy state before raising boost.~$2,000–5,000 CAD
- Étape 1 · Rue~330–400 whp on steel-wheel twins; keep JDM ceramic twins near 1 barThe classic "BPU" (basic performance upgrade) on the factory twins.~$3,000–6,000 CAD
- Étape 2 · Sportive / Piste~500–650 whp on pump fuel, more on E85Single-turbo conversion with a standalone ECU and supporting fuel and cooling.~$12,000–25,000 CAD
- Étape 3 · Préparation complète700–1,000+ whp with built internals and E85Reliable 700+ whp, or a dedicated track/drag car.~$25,000–60,000+ CAD
À vérifier avant de modifier (4)
- JDM twins use ceramic turbine wheels that can shed above about 1 bar; check shaft play and smoke before adding boost.
- The sequential system relies on many vacuum hoses and VSVs; perished hoses cause boost spikes and dips at the 4,000 rpm transition.
- Factory boost cut (fuel cut) stops any boost increase until the ECU or a fuel cut defender handles it.
- 25+ year old cooling system (radiator, hoses, water pump), timing belt (interference engine) and rubber bushings.
