Guide de préparation
Toyota Mark II iR-V (JZX110)
Moteur: 1JZ-GTE VVT-i (single turbo)
The last 1JZ Mark II carries over the VVT-i turbo engine from the JZX100 in a stiffer, more modern shell. Parts support is thinner than for the JZX100, but most engine parts are shared.
Ce guide est en anglais pour l’instant.

Photo : Tokumeigakarinoaoshima · CC BY-SA 4.0 · Wikimedia Commons
- Étape 0 · BaseStock (~280 PS)Timing service, coils and cooling.~$1,500–3,500 CAD
- Étape 1 · Rue~260–300 whpExhaust, boost control and chassis basics.~$2,500–5,000 CAD
- Étape 2 · Sportive / Piste~350–450 whpUpgraded turbo, FMIC, fuel, ECU.~$7,000–14,000 CAD
- Étape 3 · Préparation complète500+ whpBuilt 1JZ or 2JZ swap.~$18,000–35,000 CAD
À vérifier avant de modifier
- Same 1JZ VVT-i points as the JZX100 (ceramic turbo, coils, timing belt).
- Many are automatic; check for manual conversion quality.
- Body-specific parts (bumpers, some suspension) are rarer than JZX100.
Base
Timing service, coils and cooling.
- Puissance (estimation)
- Stock (~280 PS)
- Budget pièces
- ~$1,500–3,500 CAD
Moteur
- Timing belt kit and water pumpAisinToyota OEM
Électronique et calibration
- Coil packs and plugsDensoNGK
Refroidissement
- Radiator and hosesKoyoToyota OEM
Ordre des travaux
- Timing belt and cooling, then a baseline.
Rue
Exhaust, boost control and chassis basics.
- Puissance (estimation)
- ~260–300 whp
- Budget pièces
- ~$2,500–5,000 CAD
Admission et échappement
- Front pipe and cat-backHKSBlitzFujitsubo
Électronique et calibration
- Boost controllerHKSBlitz
Suspension
- CoiloversTeinCuscoBC Racing
Transmission
- Mechanical LSDCuscoOS Giken
Freins
- Performance pads and DOT 4 fluidHawkProject MuMotul
Roues et pneus
- Quality 200TW performance tiresYokohamaBridgestoneFalken
Ordre des travaux
- Exhaust and boost; then coilovers and LSD.
Sportive / Piste
Upgraded turbo, FMIC, fuel, ECU.
- Puissance (estimation)
- ~350–450 whp
- Budget pièces
- ~$7,000–14,000 CAD
Suralimentation
- Upgraded CT15B or single turbo kitDriftmotionKinugawaGarrett
Refroidissement
- FMICHKSGreddy
Alimentation
- Injectors and pumpInjector DynamicsWalbro
Électronique et calibration
- Standalone ECULinkHaltech
Transmission
- Uprated clutchOS GikenExedy
Ordre des travaux
- ECU and fuel, then the turbo, then tune.
Préparation complète
Built 1JZ or 2JZ swap.
- Puissance (estimation)
- 500+ whp
- Budget pièces
- ~$18,000–35,000 CAD
Moteur
- Forged internals or 2JZ-GTE swapCPManleyARP
Transmission
- Gearbox upgrade (CD009/V160)Driftmotion
Intérieur
- Cage and seatsCuscoBride
Ordre des travaux
- Engine, gearbox and driveline together; then safety gear.
Les chiffres de puissance et de budget sont des estimations (pièces seulement, en $ CA), pas des garanties : le carburant, la calibration, le climat et le choix des pièces changent tout. Les marques sont des exemples, pas des commandites. Retirer ou vider les catalyseurs, ou désactiver les systèmes antipollution, est illégal sur les voitures de route au Canada et aux États-Unis; les pièces marquées « hors route / piste seulement » sont réservées aux véhicules de compétition.