FormerlyStock

Build guide

Mitsubishi Lancer Evolution I–III

Engine: 4G63T (TD05H turbo)

The early Evos share the tough iron-block 4G63T with a TD05 turbo and a factory front-mount intercooler. They're light, simple and cheap to make fast. A 16G-size turbo with fuel and tuning is the classic path.

Mitsubishi Lancer Evolution I–III

Photo: Stephen Hynds · CC BY-SA 2.0 · Wikimedia Commons

  1. Stage 0 · BaselineStock (250–270 PS)Belts, cooling, rust, driveline fluids.~$2,000–4,500 CAD
  2. Stage 1 · Street~240–280 whpExhaust, boost control, ECU; chassis.~$3,000–6,000 CAD
  3. Stage 2 · Spirited / Track~320–400 whpTurbo upgrade, fuel, clutch.~$6,000–12,000 CAD
  4. Stage 3 · Full build450–550 whpBuilt 4G63 and gearbox.~$15,000–30,000 CAD

Check before modifying

  • Timing belt and balance-shaft belt (interference engine); replace both and check the tensioner.
  • Rust (rear arches, sills) and ageing rubber; many have rally or accident history.
  • Viscous centre diff and gearbox synchro wear.
0

Baseline

Belts, cooling, rust, driveline fluids.

Power (estimate)
Stock (250–270 PS)
Parts budget
~$2,000–4,500 CAD

Engine

  • Timing and balance-shaft belts, tensioner, water pumpGatesMitsubishi OEM

Cooling

  • Radiator and hosesKoyoMishimoto

Drivetrain

  • Gearbox, transfer, diff fluidsMotulRedline

Aero & exterior

  • Rust repair and protectionKrownFluid Film

Order of work

  1. Compression test, belts, then cooling and fluids.
1

Street

Exhaust, boost control, ECU; chassis.

Power (estimate)
~240–280 whp
Parts budget
~$3,000–6,000 CAD

Intake & exhaust

  • 3-inch downpipe (catted) and exhaustHKSBlitzcustom

Electronics & tuning

  • Plug-in standalone or chipped ECULinkHaltech

Suspension

  • CoiloversTeinBC RacingCusco

Brakes

  • Pads, lines, fluidEndlessHawkMotul

Wheels & tires

  • Quality 200TW performance tiresYokohamaBridgestoneFalken

Order of work

  1. Exhaust and ECU, then chassis.
2

Spirited / Track

Turbo upgrade, fuel, clutch.

Power (estimate)
~320–400 whp
Parts budget
~$6,000–12,000 CAD

Forced induction

  • Bolt-on turbo (16G/TD06 or Garrett)Mitsubishi TD05-16GGarrett GTX2867RFP

Fuel

  • Injectors and pumpInjector DynamicsWalbroDeatschWerks

Drivetrain

  • Uprated clutchExedyACT

Cooling

  • Larger FMIC and oil coolerHKSSetrab

Order of work

  1. Fuel and ECU first, then turbo, then dyno tune.
3

Full build

Built 4G63 and gearbox.

Power (estimate)
450–550 whp
Parts budget
~$15,000–30,000 CAD

Engine

  • Forged pistons and rods, ARP head studsCPManleyARP

Drivetrain

  • Gearbox upgrade or later Evo gearbox swapPPGOS Giken

Interior

  • Cage and seatsSparcoOMP

Order of work

  1. Engine and gearbox together, then safety gear.

Power and budget figures are estimates (parts only, in CAD) for guidance, not guarantees: fuel, tune, climate and parts choices change everything. Brand names are examples, not endorsements or sponsorships. Removing or gutting catalytic converters, or disabling emissions systems, is illegal on road cars in Canada and the US; parts marked "off-road / track only" are for competition vehicles.

Sources