FormerlyStock

Guide de préparation

Mitsubishi Lancer Evolution I–III

Moteur: 4G63T (TD05H turbo)

The early Evos share the tough iron-block 4G63T with a TD05 turbo and a factory front-mount intercooler. They're light, simple and cheap to make fast. A 16G-size turbo with fuel and tuning is the classic path.

Ce guide est en anglais pour l’instant.

Mitsubishi Lancer Evolution I–III

Photo : Stephen Hynds · CC BY-SA 2.0 · Wikimedia Commons

  1. Étape 0 · BaseStock (250–270 PS)Belts, cooling, rust, driveline fluids.~$2,000–4,500 CAD
  2. Étape 1 · Rue~240–280 whpExhaust, boost control, ECU; chassis.~$3,000–6,000 CAD
  3. Étape 2 · Sportive / Piste~320–400 whpTurbo upgrade, fuel, clutch.~$6,000–12,000 CAD
  4. Étape 3 · Préparation complète450–550 whpBuilt 4G63 and gearbox.~$15,000–30,000 CAD

À vérifier avant de modifier

  • Timing belt and balance-shaft belt (interference engine); replace both and check the tensioner.
  • Rust (rear arches, sills) and ageing rubber; many have rally or accident history.
  • Viscous centre diff and gearbox synchro wear.
0

Base

Belts, cooling, rust, driveline fluids.

Puissance (estimation)
Stock (250–270 PS)
Budget pièces
~$2,000–4,500 CAD

Moteur

  • Timing and balance-shaft belts, tensioner, water pumpGatesMitsubishi OEM

Refroidissement

  • Radiator and hosesKoyoMishimoto

Transmission

  • Gearbox, transfer, diff fluidsMotulRedline

Aéro et extérieur

  • Rust repair and protectionKrownFluid Film

Ordre des travaux

  1. Compression test, belts, then cooling and fluids.
1

Rue

Exhaust, boost control, ECU; chassis.

Puissance (estimation)
~240–280 whp
Budget pièces
~$3,000–6,000 CAD

Admission et échappement

  • 3-inch downpipe (catted) and exhaustHKSBlitzcustom

Électronique et calibration

  • Plug-in standalone or chipped ECULinkHaltech

Suspension

  • CoiloversTeinBC RacingCusco

Freins

  • Pads, lines, fluidEndlessHawkMotul

Roues et pneus

  • Quality 200TW performance tiresYokohamaBridgestoneFalken

Ordre des travaux

  1. Exhaust and ECU, then chassis.
2

Sportive / Piste

Turbo upgrade, fuel, clutch.

Puissance (estimation)
~320–400 whp
Budget pièces
~$6,000–12,000 CAD

Suralimentation

  • Bolt-on turbo (16G/TD06 or Garrett)Mitsubishi TD05-16GGarrett GTX2867RFP

Alimentation

  • Injectors and pumpInjector DynamicsWalbroDeatschWerks

Transmission

  • Uprated clutchExedyACT

Refroidissement

  • Larger FMIC and oil coolerHKSSetrab

Ordre des travaux

  1. Fuel and ECU first, then turbo, then dyno tune.
3

Préparation complète

Built 4G63 and gearbox.

Puissance (estimation)
450–550 whp
Budget pièces
~$15,000–30,000 CAD

Moteur

  • Forged pistons and rods, ARP head studsCPManleyARP

Transmission

  • Gearbox upgrade or later Evo gearbox swapPPGOS Giken

Intérieur

  • Cage and seatsSparcoOMP

Ordre des travaux

  1. Engine and gearbox together, then safety gear.

Les chiffres de puissance et de budget sont des estimations (pièces seulement, en $ CA), pas des garanties : le carburant, la calibration, le climat et le choix des pièces changent tout. Les marques sont des exemples, pas des commandites. Retirer ou vider les catalyseurs, ou désactiver les systèmes antipollution, est illégal sur les voitures de route au Canada et aux États-Unis; les pièces marquées « hors route / piste seulement » sont réservées aux véhicules de compétition.

Sources