FormerlyStock

Build guide

Toyota Altezza RS200 (XE10 / Lexus IS 1st gen)

Engine: 3S-GE (BEAMS, VVT-i)

A balanced, compact FR sedan with a high-revving 3S-GE. It's best as a light track or drift car. The NA 3S-GE gains little from bolt-ons, so serious power means boosting it or swapping in a JZ engine.

Toyota Altezza RS200 (XE10 / Lexus IS 1st gen)

Photo: Ethan Llamas · CC BY-SA 4.0 · Wikimedia Commons

  1. Stage 0 · BaselineStock (~210 PS)Timing service and suspension refresh.~$1,500–3,000 CAD
  2. Stage 1 · Street~+5–10 hpChassis first, light breathing mods.~$2,500–5,000 CAD
  3. Stage 2 · Spirited / Track~250–300 whp (low-boost turbo)Turbo kit on 3S-GE or standalone-tuned NA build.~$7,000–14,000 CAD
  4. Stage 3 · Full build400+ whp1JZ/2JZ swap with R154/CD009, or fully built 3S.~$15,000–30,000 CAD

Check before modifying

  • The 6MT is not known for strength behind boosted engines; plan a gearbox upgrade with a turbo build.
  • Worn front and rear suspension bushings and ball joints by now.
  • Timing belt (interference) and VVT-i oil control valve.
0

Baseline

Timing service and suspension refresh.

Power (estimate)
Stock (~210 PS)
Parts budget
~$1,500–3,000 CAD

Engine

  • Timing belt and water pumpAisinToyota OEM

Suspension

  • Bushings and ball jointsToyota OEMSuperPro

Drivetrain

  • Gearbox and diff fluidMotulRedline

Order of work

  1. Timing service, then suspension refresh and alignment.
1

Street

Chassis first, light breathing mods.

Power (estimate)
~+5–10 hp
Parts budget
~$2,500–5,000 CAD

Suspension

  • CoiloversTeinCuscoBC Racing

Intake & exhaust

  • Header and cat-backFujitsuboHKSTomei

Drivetrain

  • Mechanical LSDCuscoOS GikenTRD

Brakes

  • Pads and fluidProject MuHawk

Wheels & tires

  • Quality 200TW performance tiresYokohamaBridgestoneFalken

Order of work

  1. Coilovers and LSD first; exhaust and intake are mostly sound.
2

Spirited / Track

Turbo kit on 3S-GE or standalone-tuned NA build.

Power (estimate)
~250–300 whp (low-boost turbo)
Parts budget
~$7,000–14,000 CAD

Forced induction

  • Turbo kitHKSGarrett GT28 custom

Electronics & tuning

  • Standalone ECULinkHaltech

Fuel

  • Injectors and pumpInjector DynamicsWalbro

Drivetrain

  • Uprated clutchExedyOS Giken

Order of work

  1. ECU and fuel first, then low boost on the stock bottom end.
3

Full build

1JZ/2JZ swap with R154/CD009, or fully built 3S.

Power (estimate)
400+ whp
Parts budget
~$15,000–30,000 CAD

Engine

  • 1JZ-GTE / 2JZ-GTE swap kitDriftmotioncustom mounts

Drivetrain

  • R154 or CD009 gearboxDriftmotion

Interior

  • Cage, seats, hydraulic handbrakeCuscoBride

Order of work

  1. Swap engine and gearbox together, then upgrade the diff and axles.

Power and budget figures are estimates (parts only, in CAD) for guidance, not guarantees: fuel, tune, climate and parts choices change everything. Brand names are examples, not endorsements or sponsorships. Removing or gutting catalytic converters, or disabling emissions systems, is illegal on road cars in Canada and the US; parts marked "off-road / track only" are for competition vehicles.

Sources