FormerlyStock

Guide de préparation

Toyota Altezza RS200 (XE10 / Lexus IS 1st gen)

Moteur: 3S-GE (BEAMS, VVT-i)

A balanced, compact FR sedan with a high-revving 3S-GE. It's best as a light track or drift car. The NA 3S-GE gains little from bolt-ons, so serious power means boosting it or swapping in a JZ engine.

Ce guide est en anglais pour l’instant.

Toyota Altezza RS200 (XE10 / Lexus IS 1st gen)

Photo : Ethan Llamas · CC BY-SA 4.0 · Wikimedia Commons

  1. Étape 0 · BaseStock (~210 PS)Timing service and suspension refresh.~$1,500–3,000 CAD
  2. Étape 1 · Rue~+5–10 hpChassis first, light breathing mods.~$2,500–5,000 CAD
  3. Étape 2 · Sportive / Piste~250–300 whp (low-boost turbo)Turbo kit on 3S-GE or standalone-tuned NA build.~$7,000–14,000 CAD
  4. Étape 3 · Préparation complète400+ whp1JZ/2JZ swap with R154/CD009, or fully built 3S.~$15,000–30,000 CAD

À vérifier avant de modifier

  • The 6MT is not known for strength behind boosted engines; plan a gearbox upgrade with a turbo build.
  • Worn front and rear suspension bushings and ball joints by now.
  • Timing belt (interference) and VVT-i oil control valve.
0

Base

Timing service and suspension refresh.

Puissance (estimation)
Stock (~210 PS)
Budget pièces
~$1,500–3,000 CAD

Moteur

  • Timing belt and water pumpAisinToyota OEM

Suspension

  • Bushings and ball jointsToyota OEMSuperPro

Transmission

  • Gearbox and diff fluidMotulRedline

Ordre des travaux

  1. Timing service, then suspension refresh and alignment.
1

Rue

Chassis first, light breathing mods.

Puissance (estimation)
~+5–10 hp
Budget pièces
~$2,500–5,000 CAD

Suspension

  • CoiloversTeinCuscoBC Racing

Admission et échappement

  • Header and cat-backFujitsuboHKSTomei

Transmission

  • Mechanical LSDCuscoOS GikenTRD

Freins

  • Pads and fluidProject MuHawk

Roues et pneus

  • Quality 200TW performance tiresYokohamaBridgestoneFalken

Ordre des travaux

  1. Coilovers and LSD first; exhaust and intake are mostly sound.
2

Sportive / Piste

Turbo kit on 3S-GE or standalone-tuned NA build.

Puissance (estimation)
~250–300 whp (low-boost turbo)
Budget pièces
~$7,000–14,000 CAD

Suralimentation

  • Turbo kitHKSGarrett GT28 custom

Électronique et calibration

  • Standalone ECULinkHaltech

Alimentation

  • Injectors and pumpInjector DynamicsWalbro

Transmission

  • Uprated clutchExedyOS Giken

Ordre des travaux

  1. ECU and fuel first, then low boost on the stock bottom end.
3

Préparation complète

1JZ/2JZ swap with R154/CD009, or fully built 3S.

Puissance (estimation)
400+ whp
Budget pièces
~$15,000–30,000 CAD

Moteur

  • 1JZ-GTE / 2JZ-GTE swap kitDriftmotioncustom mounts

Transmission

  • R154 or CD009 gearboxDriftmotion

Intérieur

  • Cage, seats, hydraulic handbrakeCuscoBride

Ordre des travaux

  1. Swap engine and gearbox together, then upgrade the diff and axles.

Les chiffres de puissance et de budget sont des estimations (pièces seulement, en $ CA), pas des garanties : le carburant, la calibration, le climat et le choix des pièces changent tout. Les marques sont des exemples, pas des commandites. Retirer ou vider les catalyseurs, ou désactiver les systèmes antipollution, est illégal sur les voitures de route au Canada et aux États-Unis; les pièces marquées « hors route / piste seulement » sont réservées aux véhicules de compétition.

Sources