Build guide
Toyota Celica GT-Four (ST165)
Engine: 3S-GTE gen 1 (CT26)
The first turbo AWD Celica and an early Group A rally car. The gen 1 3S-GTE is tough, and these cars are mostly built as rally-inspired road cars or restored classics. Many parts interchange with the later ST185.

Photo: Charles from Port Chester, New York · CC BY 2.0 · Wikimedia Commons
- Stage 0 · BaselineStock (~185 PS)Rust, timing service, driveline fluids.~$2,000–5,000 CAD
- Stage 1 · Street~200–230 whpExhaust, boost control, fuel cut handling.~$1,500–3,500 CAD
- Stage 2 · Spirited / Track~260–320 whpFMIC, fuel, ECU, hybrid turbo.~$5,000–10,000 CAD
- Stage 3 · Full build350+ whpGen 3 3S-GTE swap or built engine.~$12,000–25,000 CAD
Check before modifying
- Age-related rust, especially rear arches and sills.
- Centre diff, viscous coupling and transfer case wear.
- Vacuum lines, fuel cut and tired turbo.
Baseline
Rust, timing service, driveline fluids.
- Power (estimate)
- Stock (~185 PS)
- Parts budget
- ~$2,000–5,000 CAD
Engine
- Timing belt and water pumpAisinToyota OEM
Drivetrain
- Gearbox, transfer and diff fluidsMotulRedline
Aero & exterior
- Rust repair and cavity protectionKrownFluid Film
Order of work
- Rust first, then timing service, then driveline fluids.
Street
Exhaust, boost control, fuel cut handling.
- Power (estimate)
- ~200–230 whp
- Parts budget
- ~$1,500–3,500 CAD
Intake & exhaust
- 3-inch downpipe and exhaustHKScustom
Electronics & tuning
- Boost controller + fuel cut defenderHKSBlitz
Suspension
- Dampers and bushingsKYBBilsteinSuperPro
Brakes
- Performance pads and DOT 4 fluidHawkProject MuMotul
Wheels & tires
- Quality 200TW performance tiresYokohamaBridgestoneFalken
Order of work
- Exhaust, then boost control; wideband gauge.
Spirited / Track
FMIC, fuel, ECU, hybrid turbo.
- Power (estimate)
- ~260–320 whp
- Parts budget
- ~$5,000–10,000 CAD
Cooling
- FMICcustomMishimoto
Forced induction
- CT26 hybrid or GT28 conversionGarretthybrid specialists
Electronics & tuning
- Standalone ECULinkHaltech
Fuel
- Injectors and pumpInjector DynamicsWalbro
Drivetrain
- Uprated clutchExedyCompetition Clutch
Order of work
- ECU and fuel first, then turbo and intercooler.
Full build
Gen 3 3S-GTE swap or built engine.
- Power (estimate)
- 350+ whp
- Parts budget
- ~$12,000–25,000 CAD
Engine
- Gen 3 3S-GTE swap or forged internalsCPManleyARP
Interior
- Cage, seats, harnessesSparcoOMP
Order of work
- Engine and driveline together; safety gear for rally or track use.
Power and budget figures are estimates (parts only, in CAD) for guidance, not guarantees: fuel, tune, climate and parts choices change everything. Brand names are examples, not endorsements or sponsorships. Removing or gutting catalytic converters, or disabling emissions systems, is illegal on road cars in Canada and the US; parts marked "off-road / track only" are for competition vehicles.