FormerlyStock

Toyota Celica T160

T160 (4th gen) · 1985–1989

Engine
3S-GTE
Power
183 hp
Bolt pattern (PCD)
5x100
Toyota Celica T160

Photo: Charles from Port Chester, New York · CC BY 2.0 · Wikimedia Commons

Key facts

The Toyota Celica T160 was built from 1985–1989. Engines: 3S-GTE. Factory output is 183 hp (Japanese-market figures). Wheels bolt on with a 5x100 pattern, — mm hub bore and M12x1.5 lug thread.

Build guide

Toyota Celica GT-Four (ST165)

3S-GTE gen 1 (CT26)

The first turbo AWD Celica and an early Group A rally car. The gen 1 3S-GTE is tough, and these cars are mostly built as rally-inspired road cars or restored classics. Many parts interchange with the later ST185.

  1. Stage 0 · BaselineStock (~185 PS)Rust, timing service, driveline fluids.~$2,000–5,000 CAD
  2. Stage 1 · Street~200–230 whpExhaust, boost control, fuel cut handling.~$1,500–3,500 CAD
  3. Stage 2 · Spirited / Track~260–320 whpFMIC, fuel, ECU, hybrid turbo.~$5,000–10,000 CAD
  4. Stage 3 · Full build350+ whpGen 3 3S-GTE swap or built engine.~$12,000–25,000 CAD
Check before modifying (3)
  • Age-related rust, especially rear arches and sills.
  • Centre diff, viscous coupling and transfer case wear.
  • Vacuum lines, fuel cut and tired turbo.
Read the full Toyota Celica GT-Four (ST165) build guide →

Performance upgrades

The usual path for this car’s engines, from bolt-ons to big power, and what tends to break first.

Toyota 3S-GTE

Turbo

Gen 3 (MR2 Rev 3) and Gen 4 (ST205) engines are the most wanted for swaps.

  1. Stage 1 · Bolt-ons250–280 hp
    • Boost controller
    • Downpipe
    • Exhaust
    • ECU tune
  2. Stage 2 · Supporting mods300–350 hp
    • Upgraded turbo
    • Front-mount intercooler
    • Fuel pump
    • Injectors
  3. Stage 3 · Big power400+ hp
    • Head studs
    • Built bottom end
    • Standalone ECU

Known weak points

  • Stock CT26/CT20 turbos are small and fragile at high boost.
  • Head gaskets want studs and a careful tune past about 350 hp.
More about the Toyota 3S-GTE →

Trims

TrimChassis codeEngineDrivetrainPowerBolt pattern (PCD)Years
GT-FourST1653S-GTEAWD183 hp5x1001986–1989

Stock spec sheet

T160 GT-FourST165

Japan (JDM)1986–1989

Engine & drivetrain

Engine
3S-GTE
Displacement
1,998 cc (2 L)
Aspiration
Turbo
Bore × stroke
86 × 86 mm
Compression
8.5:1
Transmission
5MT
Drivetrain
All-wheel drive (AWD)
Differential
Viscous centre differential

Stock performance

Power
183 hp (136 kW) @ 6,000 rpm
Torque
240 N·m (177 lb-ft) @ 4,000 rpm

Factory wheels & tires

Bolt pattern (PCD)
5x100
Lug thread
M12x1.5

Dimensions

Length
4,365 mm (171.9 in)
Width
1,690 mm (66.5 in)
Height
1,290 mm (50.8 in)
Wheelbase
2,525 mm (99.4 in)

Source: Formerly Stock compiled from Japanese-market manufacturer data

Frequently asked questions

What engine does the Toyota Celica T160 have?

The Toyota Celica T160 came with the 3S-GTE.

How much horsepower does the Toyota Celica T160 have?

The Toyota Celica T160 makes 183 hp from the factory (Japanese-market figures).

What is the bolt pattern of the Toyota Celica T160?

The Toyota Celica T160 uses a 5x100 bolt pattern with a — mm hub bore and M12x1.5 lug thread.

What are the common problems with the Toyota 3S-GTE?

Stock CT26/CT20 turbos are small and fragile at high boost. Head gaskets want studs and a careful tune past about 350 hp.

Where should I start building a Toyota Celica T160?

Rust, timing service, driveline fluids. Rust first, then timing service, then driveline fluids.

How much power can a Toyota Celica T160 make, and what does it cost?

A full build (Gen 3 3S-GTE swap or built engine) typically makes 350+ whp, for roughly 12,000–25,000 CAD in parts. These are estimates; fuel, tune and parts choices change the result.

Shops for the Toyota Celica T160

No specialist shop for the Toyota Celica T160 in our list yet. The Japanese-car shops in the store directory carry parts for it.

Prices, stock and shipping are on each store's site. Formerly Stock doesn't get paid for these links.