FormerlyStock

Toyota Celica T180

T180 (5th gen) · 1989–1993

Engine
3S-GTE
Power
222 hp
Bolt pattern (PCD)
5x100
Toyota Celica T180

Photo: MercurySable99 · CC BY-SA 4.0 · Wikimedia Commons

Key facts

The Toyota Celica T180 was built from 1989–1993. Engines: 3S-GTE. Factory output is 222 hp (Japanese-market figures). Wheels bolt on with a 5x100 pattern, — mm hub bore and M12x1.5 lug thread.

Build guide

Toyota Celica GT-Four (ST185)

3S-GTE gen 2 (CT26 twin-entry)

The "super round" rally Celica. The gen 2 3S-GTE responds well to ECU and boost work, and parts are shared with the SW20 MR2 Turbo. RC/Carlos Sainz versions are the collectible ones.

  1. Stage 0 · BaselineStock (~225 PS)Timing service, rust, driveline fluids.~$2,000–4,500 CAD
  2. Stage 1 · Street~220–260 whpExhaust, boost controller, fuel cut defender.~$1,500–3,500 CAD
  3. Stage 2 · Spirited / Track~300–350 whpFMIC, ECU, fuel and turbo upgrade.~$5,000–10,000 CAD
  4. Stage 3 · Full build400+ whpBuilt 3S-GTE and upgraded gearbox.~$12,000–25,000 CAD
Check before modifying (3)
  • Fuel cut limits boost; vacuum lines perish.
  • E150-series gearbox and centre diff wear; check for grinding and clunks.
  • Rust and failing power steering racks.
Read the full Toyota Celica GT-Four (ST185) build guide →

Performance upgrades

The usual path for this car’s engines, from bolt-ons to big power, and what tends to break first.

Toyota 3S-GTE

Turbo

Gen 3 (MR2 Rev 3) and Gen 4 (ST205) engines are the most wanted for swaps.

  1. Stage 1 · Bolt-ons250–280 hp
    • Boost controller
    • Downpipe
    • Exhaust
    • ECU tune
  2. Stage 2 · Supporting mods300–350 hp
    • Upgraded turbo
    • Front-mount intercooler
    • Fuel pump
    • Injectors
  3. Stage 3 · Big power400+ hp
    • Head studs
    • Built bottom end
    • Standalone ECU

Known weak points

  • Stock CT26/CT20 turbos are small and fragile at high boost.
  • Head gaskets want studs and a careful tune past about 350 hp.
More about the Toyota 3S-GTE →

Trims

TrimChassis codeEngineDrivetrainPowerBolt pattern (PCD)Years
GT-FourST1853S-GTEAWD222 hp5x1001989–1993

Stock spec sheet

T180 GT-FourST185

Japan (JDM)1989–1993

Engine & drivetrain

Engine
3S-GTE
Displacement
1,998 cc (2 L)
Aspiration
Turbo
Bore × stroke
86 × 86 mm
Compression
8.8:1
Transmission
5MT
Drivetrain
All-wheel drive (AWD)
Differential
Viscous centre differential

Stock performance

Power
222 hp (165 kW) @ 6,000 rpm
Torque
304 N·m (224 lb-ft) @ 3,200 rpm

Factory wheels & tires

Wheels
15"
Tires
215/50R15
Tire diameter
596 mm (23.5 in)
Bolt pattern (PCD)
5x100
Lug thread
M12x1.5

Dimensions

Length
4,420 mm (174 in)
Width
1,690 mm (66.5 in)
Height
1,305 mm (51.4 in)
Wheelbase
2,525 mm (99.4 in)

Source: Formerly Stock compiled from Japanese-market manufacturer data

Frequently asked questions

What engine does the Toyota Celica T180 have?

The Toyota Celica T180 came with the 3S-GTE.

How much horsepower does the Toyota Celica T180 have?

The Toyota Celica T180 makes 222 hp from the factory (Japanese-market figures).

What is the bolt pattern of the Toyota Celica T180?

The Toyota Celica T180 uses a 5x100 bolt pattern with a — mm hub bore and M12x1.5 lug thread.

What are the common problems with the Toyota 3S-GTE?

Stock CT26/CT20 turbos are small and fragile at high boost. Head gaskets want studs and a careful tune past about 350 hp.

Where should I start building a Toyota Celica T180?

Timing service, rust, driveline fluids. Timing service and fluids; inspect the transfer case.

How much power can a Toyota Celica T180 make, and what does it cost?

A full build (Built 3S-GTE and upgraded gearbox) typically makes 400+ whp, for roughly 12,000–25,000 CAD in parts. These are estimates; fuel, tune and parts choices change the result.

Shops for the Toyota Celica T180

No specialist shop for the Toyota Celica T180 in our list yet. The Japanese-car shops in the store directory carry parts for it.

Prices, stock and shipping are on each store's site. Formerly Stock doesn't get paid for these links.