Build guide
Toyota Celica GT-Four (ST185)
Engine: 3S-GTE gen 2 (CT26 twin-entry)
The "super round" rally Celica. The gen 2 3S-GTE responds well to ECU and boost work, and parts are shared with the SW20 MR2 Turbo. RC/Carlos Sainz versions are the collectible ones.

Photo: MercurySable99 · CC BY-SA 4.0 · Wikimedia Commons
- Stage 0 · BaselineStock (~225 PS)Timing service, rust, driveline fluids.~$2,000–4,500 CAD
- Stage 1 · Street~220–260 whpExhaust, boost controller, fuel cut defender.~$1,500–3,500 CAD
- Stage 2 · Spirited / Track~300–350 whpFMIC, ECU, fuel and turbo upgrade.~$5,000–10,000 CAD
- Stage 3 · Full build400+ whpBuilt 3S-GTE and upgraded gearbox.~$12,000–25,000 CAD
Check before modifying
- Fuel cut limits boost; vacuum lines perish.
- E150-series gearbox and centre diff wear; check for grinding and clunks.
- Rust and failing power steering racks.
Baseline
Timing service, rust, driveline fluids.
- Power (estimate)
- Stock (~225 PS)
- Parts budget
- ~$2,000–4,500 CAD
Engine
- Timing belt and water pumpAisinToyota OEM
Drivetrain
- Driveline fluids and mountsMotulToyota OEM
Aero & exterior
- Rust repairKrownFluid Film
Order of work
- Timing service and fluids; inspect the transfer case.
Street
Exhaust, boost controller, fuel cut defender.
- Power (estimate)
- ~220–260 whp
- Parts budget
- ~$1,500–3,500 CAD
Intake & exhaust
- Downpipe and 3-inch exhaustHKScustom
Electronics & tuning
- Boost controller + fuel cut defenderHKSBlitz
Brakes
- Pads and fluidHawkEBCMotul
Wheels & tires
- Quality 200TW performance tiresYokohamaBridgestoneFalken
Order of work
- Exhaust, then boost; monitor AFR.
Spirited / Track
FMIC, ECU, fuel and turbo upgrade.
- Power (estimate)
- ~300–350 whp
- Parts budget
- ~$5,000–10,000 CAD
Cooling
- FMIC conversionMishimotocustom
Forced induction
- CT20B swap, hybrid or GT28/2871RGarrett
Electronics & tuning
- Standalone ECULinkHaltech
Fuel
- 550–850 cc injectors and pumpInjector DynamicsWalbro
Drivetrain
- Uprated clutchExedyCompetition Clutch
Suspension
- CoiloversTeinBC Racing
Order of work
- ECU and fuel, then turbo; dyno tune.
Full build
Built 3S-GTE and upgraded gearbox.
- Power (estimate)
- 400+ whp
- Parts budget
- ~$12,000–25,000 CAD
Engine
- Forged pistons/rods, ARP studs, MLS gasketCPManleyARP
Drivetrain
- Gearbox rebuild or dog boxSQSQuaife
Interior
- Cage and seatsSparcoOMP
Order of work
- Engine and gearbox together, then safety gear.
Power and budget figures are estimates (parts only, in CAD) for guidance, not guarantees: fuel, tune, climate and parts choices change everything. Brand names are examples, not endorsements or sponsorships. Removing or gutting catalytic converters, or disabling emissions systems, is illegal on road cars in Canada and the US; parts marked "off-road / track only" are for competition vehicles.